jig for thinning blue foam
|
|
jig for thinning blue foam |
|
|
 |
Navigation & Acknowledgements |
blue foam sanding jig: 2015-01-13
Lumix DMC-FT1
The jig I made for sanding the blue foam stiffening panels down to the required thickness of 7mm. I had already cut them to slightly oversized thickness on the bandsaw.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2015-02-08. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||