bonding Flettner strips to tabs
|
|
bonding Flettner strips to tabs |
|
|
 |
Navigation & Acknowledgements |
attaching Flettner strips to trim tabs: 2018-10-22 Panasonic DMC-FT1
Holding the balsa Flettner strips in place with clothes pegs while the epoxy that secures them to the trim tabs cures. There are strips of peel-ply along each strip of balsa to mop up any epoxy seepage, and a layer of polyethylene sheet on top of the peel-ply to prevent the clothes pegs sticking.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2018-11-04. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||