Fin wedged open
|
|
Fin wedged open |
|
|
 |
Navigation & Acknowledgements |
fin wedge: 2014-09-30
Lumix DMC-FT1
A block of wood inserted into the top of the fin to spread the sides apart for the process of bonding in the fin ribs. Just visible are the areas inside the fin where the ribs will fit, abraded ready for bonding. The fin ribs are sitting on top of the fin. The conduit for the comm radio antenna is the white thing sticking through the rear bulkhead. I was so busy after this doing the Redux 420 mixing and spreading that I didn't have time to take any more photos that day!
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2014-11-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||