camera mount test bracket
|
|
camera mount test bracket |
|
|
 |
Navigation & Acknowledgements |
bracket on camera mount for checking strength: 2022-05-27 Panasonic DMC-FT1
To allow testing the strength of the camera mount, I fitted this steel bracket behind the dome nut (which protects the stud when the mount is not is use). A spring balance can be hooked through the hole in the bracket.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-06-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||