![]() |
Position sternpost hole |
![]() |
|
![]() |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
positioning sternpost hole: 2013-08-22
Panasonic Lumix DMC-FT1
The outside calipers were set to the specified 1" to mark the position of the hole to be made in the sternpost for the tailwheel arm.
positioning sternpost hole: 2013-08-22
Panasonic Lumix DMC-FT1
The outside calipers were set to the specified 1" to mark the position of the hole to be made in the sternpost for the tailwheel arm.
![]() |
![]() ![]() |
go to next picture page![]() |
![]() ![]() |
||
Return to Rowland's home page |
This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
![]() |
![]() |
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. |