nutplates for dolly screws
|
|
nutplates for dolly screws |
|
|
 |
Navigation & Acknowledgements |
fuselage dolly nutplates: 2014-10-15
Lumix DMC-FT1
I made these nutplates to secure the fuselage to the rigging dolly, using some offcuts of aluminium and M10 stainless steel hank bushes.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2014-11-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||