Crank arm clamped to CS03 for drilling
|
|
Crank arm clamped to CS03 for drilling |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
crank arm clamped to CS03: 2008-07-23
Nikon Coolpix 8400
The crank arm clamped to CS03, with CS05 inserted through both components to ensure alignment.
crank arm clamped to CS03: 2008-07-23
Nikon Coolpix 8400
The crank arm clamped to CS03. CS05 now removed to allow rivet holes to be drilled.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||